ANALISA POTENSI KECEPATAN ANGIN PADA MODUL LATIH RANCANG BANGUN PLTB

Dezetty Monika Politeknik Negeri Jakarta
Nuha Nadhiroh Politeknik Negeri Jakarta
Mutiar Mutiar Politeknik Negeri Sriwijaya Palembang

DOI: https://doi.org/10.36546/jte.v14i1.1187

Keywords: Electrical energy, Wind energy, Turbine Savonius, Wind Power

Abstract

Electrical energy is energy that can be generated from the conversion of various types of energy, one of which is wind energy. The average wind speed in Indonesia is classified as low speed, only certain areas have moderate to high wind speeds. Low wind speed does not mean that the potential energy contained in it cannot be utilized or converted into electrical energy, it can still be utilized but a generator is needed that matches the characteristics of the wind speed. Therefore, the turbine used is the Savonius type, which can work in low wind speeds. The purpose of this research is to measure output power against wind speed. With experimental methods using an anemometer and measuring voltage, current and output power. From the results of this study, the maximum power generated by the wind power training module is 0.008 Watt with a wind speed of 4.31 m/s and the minimum power generated is 0.001 Watt with a wind speed of 1.17 m/s. In a day, the average wind speed is 2.94 m/s so from the wind speed the wind power training module is able to produce an average power of 0.001 Watt.

References

[1] I. Priyadi, A. Surapati and V. T. Putra, "Rancang Bangun Turbin Angin Horizontal Sebagai Salah Satu Pembangkit Daya Pada Mobil Hybrid," Seminar Nasional Inovasi, Teknologi dan Aplikasi, pp. 1-12, 2018.
[2] "Pilot Plan Project Energi Angin Potensi Energi Angin 2020," 20 Januari 2021. [Online]. Available: https://p3tkebt.esdm.go.id/pilot-plan- project/energi_angin/potensi-energi- angin-indonesia-2020.
[3] R. A. Akmal and R. Ahmad, Kincir Angin Membelah Bukit Pabbarasseng Kabupaten Sidenreng Rappang, Yogyakarta: Deepublish, 2020.
[4] A. Bachtiar and W. Hayyatul, "Analisis Potensi Pembangkit Listrik Tenaga Angin PT. Lentera Angin Nusantara (LAN) Ciheras," Jurnal Teknik Elektro ITP, Vol.7, 2018.
[5] B. Sugiharto, S. Soeparman, D. Widhiyanuriyawan, and S. Wahyudi, “Characteristics of the Savonius Wind Turbine Using Multiple Guide Vanes,” International Journal of Fluid Machinery and Systems, vol. 13, no. 3, pp. 606–614, Sep. 2020, doi: https://doi.org/10.5293/ijfms.2020.13.3.606.
[6] M. G. Rianta, "Mengenal Pembangkit Listrik Tenaga Bayu PLTB Dan Mekanisme Kegagalan Pada Turbin Angin," 6 Oktober 2021. [Online]. Available: https://indonesiare.co.id/id/article/mengenal-pembangkit-listrik-tenaga-bayu-pltb-danmekanisme-kegagalan-pada- turbin-angin.
[7] D. W. Jati, T. Sukmadi and Karnoto, "Perancangan Generator Fluks Aksial Putaran Rendah Magnet Permanen Jenis Neodymium (NdFeB) Dengan Variasi Celah Udara," Seminar Nasional Fisika (E-Journal) SNF2015, vol 4, no. 1, pp. 135-142, Okt. 2015.
[8] Direktorat Jenderal Energi Baru Terbarukan dan Konversi Energi, "Panduan Pengoperasian dan Pemeliharaan PLTB Off-Grid," 2021. [Online]. Available: https://ebtke.esdm.go.id/.
[9] Y. Daryanto, "Kajian Potensi Angin untuk Pembangkit Listrik Tenaga bayu," Balai PPTAG-UPT-LAGG, pp. 1-32, 2007.
[10] D. Monika, Nuha Nadhiroh, Ikhsan Kamil, Mochammad Fahmi Aprilianto, Agris Haznu Pamekas, and Ebenheazer Sitindaon, “Rancang Bangun Pembangkit Listrik Tenaga Bayu dengan Turbin Savonius”, SNTE, vol. 9, no. 1, pp. 62–67, Jan. 2024.
[11] F. Aryanto, I. M. Mara and M. Nuarsa, "Pengaruh Kecepatan Angin Dan Variasi Jumlah Sudu Terhadap Unjuk Kerja Turbin Angin Poros Horizontal," Dinamika Teknik Mesin, pp. 50-59, 2013.
[12] R. M. Hamid, Rizky, M. Amin and I. B. D, "Rancang Bangun Charger Baterai Untuk Kebutuhan UMKM," Jurnal Teknologi Terpadu No. 2 Vol. 4, pp. 130-136, 2016.

Published

2024-04-15

Issue

Vol 14 No 1 (2024): Jurnal Teknik Elektro

Section

Articles

An author who publishes in the Jurnal Teknik Elektro (JTE) agrees to the following terms:

Author retains the copyright and grants the journal the right of first publication of the work simultaneously licensed under the Creative Commons Attribution-ShareAlike 4.0 License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

Submission of a manuscript implies that the submitted work has not been published before (except as part of a thesis, report, or abstract); that it is not under consideration for publication elsewhere; that its publication has been approved by all co-authors. If and when the manuscript is accepted for publication, the author(s) still hold the copyright and retain publishing rights without restrictions. For the new invention, authors are suggested to manage its patent before publication. The license type is CC-BY-SA 4.0.