ANALISIS PENGUKURAN DAN PERHITUNGAN DAYA LISTRIK DENGAN SISTEM MONITORING BERBASIS WEB DI AREA INDUSTRI

Dumung Weling Kusuma Universitas Pamulang
Aripin Triyanto Universitas Pamulang

DOI: https://doi.org/10.36546/jte.v14i2.1325

Keywords: Electrical Instalation, EMS, PMS, Web-based system monitoring, Electrical power

Abstract

The use of electricity must be paid more attention so that there is no overrun of electricity costs. Because of these problems, the author took the title Analysis of electrical power measurement and calculation with web-based system monitoring in industrial areas. This study uses a calculation and measurement research methodology. After measurements and calculations are carried out with system monitoring, the results of the calculation of electrical power measurements and observations are obtained by analyzing the percentage of error values from the comparison of values obtained from the measurement results using the energy monitoring system with the value of the measurement results using the Power monitoring sensor (PMS) and calculations using formulas. The final result of this study was obtained from the results of monitoring voltage, current, power, and power factor. For the results of the analysis of the percentage of electrical power error values, it was carried out by comparing the calculation of Power Monitoring Sensor (PMS) with Energy Monitoring System (EMS) with a monitoring time of 3 months, the first month had an error value of 0.6%, the second month had an error value of 0.2%, and the second month had an error value of 0.1%. Thus, the difference in error values is quite small, it can be concluded that this tool is said to be quite good in monitoring the use of electrical power in industrial areas.

References

Anarwati, Agustin, and Iman Setiono. 2017. “Rancang Bangun Alat Pemantauan Pengaturan Kecepatan Putar Motor Dc Power Windows Berbasis Plc Panasonic Menggunakan Human Machine Interface (Hmi).” Gema Teknologi 19 (3): 32. https://doi.org/10.14710/gt.v19i3.21883.

Handarly, Dolly, and Jefri Lianda. 2018. “Sistem Monitoring Daya Listrik Berbasis IoT (Internet of Thing).” JEECAE (Journal of Electrical, Electronics, Control, and Automotive Engineering) 3 (2): 205–8. https://doi.org/10.32486/jeecae.v3i2.241.

Herandy, Galla, and Bambang Suprianto. 2019. “‘Monitoring Biaya Dan Pengukuran Konsumsi Daya Listrik Berbasis Arduino Mega2560 Menggunakan Web.’” Jurnal Teknik Elektro 8 (3): 695–702.

Hidayah, Muhammad Nurul, Alfita Riza, and Aji Kunto. 2020. “Implementasi Internet of Thing Untuk Kontrol Dan Monitoring Kwh Meter Pascabayar.” Jurnal Pendidikan Teknik Elektro Undiksha 9 (3): 161–70.

Mustafa, Syahrul, and Umar Muhammad. 2020. “Rancang Bangun Sistem Monitoring Penggunaan Daya Listrik Berbasis Smartphone.” Jurnal Media Elektrik 17 (3): 127. https://doi.org/10.26858/metrik.v17i3.14968.

Saleh, Zulkiffli, Yosi Apriani, Surahman Nazori, Dosen Tetap, Prog Studi, Teknik Elektro, and Universitas Muhammadiyah. 2022. “Jurnal Teknik Elektro Jurnal Teknik Elektro” 12 (2): 40–49.

Triyanto, Aripin. 2023. PROTEKSI SISTEM TENAGA. UNPAM PRESS.

Triyanto, Aripin, Aldy Laras Sakti, Hendra Nugraha, and Abid Ahmad Rifai. 2022. Operasi Dan Stabilitas Sistem Tenaga. Edited by Ariyawan Sunardi. UNPAM PRESS.

Yuhendri, Muldi, Dona Doni, and Anne Fadia Ikhfa. 2023. “Rancang Bangun Generator Magnet Permanen Fluksi Aksial Single Stator Single Rotor.” Simetris: Jurnal Teknik Mesin, Elektro Dan Ilmu Komputer 14 (2): 339–50. https://doi.org/10.24176/simet.v14i2.9750.

Published

2024-11-15

Issue

Vol 14 No 2 (2024): Jurnal Teknik Elektro

Section

Articles

An author who publishes in the Jurnal Teknik Elektro (JTE) agrees to the following terms:

Author retains the copyright and grants the journal the right of first publication of the work simultaneously licensed under the Creative Commons Attribution-ShareAlike 4.0 License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

Submission of a manuscript implies that the submitted work has not been published before (except as part of a thesis, report, or abstract); that it is not under consideration for publication elsewhere; that its publication has been approved by all co-authors. If and when the manuscript is accepted for publication, the author(s) still hold the copyright and retain publishing rights without restrictions. For the new invention, authors are suggested to manage its patent before publication. The license type is CC-BY-SA 4.0.